robogaia.com
  • Products
    • 3 Axis Encoder Conter Arduino Shield
    • 6 Channel Encoder Counter Arduino Shield
    • 8 Channel Encoder Counter Arduino Shield
    • Raspberry Pi 6 Channel Encoder Hat
    • Raspberry Temperature Controller Plate
    • 4 Relays Raspberry Pi Plate/Shield
    • C2N-UNI8IO To Terminal Block Board
    • Arduino Solid State Relay
    • Encoder Shield Connector
    • Mechanical Encoder Board with Connector
    • Raspberry Pi Dual Thermocouple Plate
    • Raspberry Pi 3 Channel Encoder Hat
    • HC-SR04 Ultrasonic Distance Sensor
  • Blog
  • Contact
  • Tutorials
    • How to Add a Web Interface to the Raspberry Pi 4 Relay Board
    • How to add a simple web server on Raspberry Pi with Flask Framework
    • How To Calculate Resistor Wattage
    • How To Start With Robotics
    • How To Start With Artificial Intelligence
    • How to start with CNC 6040 machine
    • How to calibrate Robogaia accelerometer/gyro shield
    • How to build Balancino (the balancing robot)
  • Distributors
  • Services
  • About

The robot that participated at Cleveland maker Faire 2014

3/31/2014

1 Comment

 
This year your participation was a success . The children were very impressed to be able to control a 30 pound robot using a mouse.  The robot was powered by a 10AH 24 volts battery , which drained after about 4 hours of continuous use . The robot was controlled using a Raspberry Pi , a Robogaia Relay Board and an old router.
Picture
Picture
Picture
1 Comment
Sara Pacheco
3/10/2015 01:20:59 am

I am doing a project for the maker faire at my school and I was wondering if you could send me instructions for this project. I will give credit. I will not copy your project, I will find a way to innovate it. Thank you.

Reply



Leave a Reply.

    Categories

    All
    Electronics
    Entrepreneorship
    Maker
    Radio Shows
    Tutorials

    RSS Feed

    Archives

    August 2017
    January 2015
    August 2014
    July 2014
    March 2014
    October 2013
    August 2011
    June 2011
    May 2011

@Robogaia 2021